Countertop installation in Lawrenceville runs $2,400 to $7,800 for a mid-size kitchen, depending on material. Laminate is $2,400 to $3,600. Butcher block $2,800 to $4,500. Granite $3,500 to $6,200. Quartz $4,200 to $7,800. Template-to-install is 5 to 7 business days once you choose a slab. We walk every job from measure to the final silicone bead on the splash.
Red-clay movement matters here too. Older Lawrenceville ranches off Collins Hill and the Bethesda area often have cabinet runs that are no longer level because the slab underneath has shifted. Setting a 3cm quartz slab on an unlevel cabinet run means hairline cracks at the seam within a year, especially over a dishwasher cutout. We laser the top of the cabinet run before template day and shim with hard plastic feet so the finished counter sits dead level and transfers load to the box corners, not the center of the slab.
Material choice in Lawrenceville leans toward quartz for 2026. Granite was the default for every ranch remodel in the 1990s and 2000s, and about 60% of what we tear out is dated granite with worn sealer. Quartz handles the humidity better (no re-sealing, no staining from pollen and acidic foods), and the price gap has narrowed to $400 to $900 for a typical Lawrenceville kitchen. Butcher block has made a comeback on islands and prep-corners in the newer Sugarloaf Pkwy homes, usually paired with quartz on the main run. We install real-wood butcher block with a food-safe mineral-oil finish and hand you a care sheet.
The common failures we see: undermount sinks installed with weak methacrylate adhesive that drop out in year 2, backsplash seams caulked with big-box latex that cracks within 18 months in Georgia humidity, and butcher-block sections installed butt-up against the range without the heat shield, which scorches the edge grain. We use 100% silicone on every seam, rated structural methacrylate on undermounts, and heat-shield gap-strips on butcher-block-to-range transitions.
What we handle
Quartz Countertop Installation
3cm quartz slabs from Caesarstone, Cambria or Silestone. Template to install in 7 days.
Granite Countertop Installation
Mid-range to premium granite slabs sealed on install with a 5-year impregnating sealer.
Butcher Block Installation
Solid maple, walnut or acacia butcher block, finished with food-safe mineral oil. Common on islands.
Laminate Countertop Installation
Mid-range laminate with a finished square or ogee edge. Rental and starter-home refresh pick.
Countertop Replacement with Existing Cabinets
Swap counters only, keep the boxes. 2 days on site.
Undermount Sink Re-Installation
Common emergency fix when a previous install's undermount sink has dropped. Rated structural adhesive.
Edge Profile Upgrade
Switch square edges to bullnose, ogee, or waterfall on existing counters where the slab allows.
Repair of Hairline Cracks and Seams
Seam re-flow on quartz and granite counters that have cracked from settled cabinet runs.
How the job goes
1. Material Pick and Measure
We bring sample chips to the measure, laser the cabinet-run levelness, and confirm the layout. You pick the slab at the fabricator's yard in Buford or Norcross.
2. Template Day
A fabricator cuts a plywood template of your kitchen on-site, usually 1 to 2 business days after you confirm the slab. Takes about 2 hours.
3. Fabrication (3 to 5 days)
Slab cut at the shop with CNC water-jet. Cutouts for sink, range, and any outlet placements. Edge polished to the profile you chose.
4. Install Day
Old counter out in the morning, new counter in and seamed by afternoon. Full use by the next day after the silicone cures.
5. Walkthrough
We walk every seam and every cutout with you, hand over the sealer schedule (if granite), and sign the warranty.
What's included
- In-home measure and sample consultation
- Written line-item quote
- Laser leveling of cabinet runs before template
- Template and fabrication
- Tear-out and haul-away of existing counters
- Install with structural methacrylate on undermount sinks
- 100% silicone on every seam and splash joint
- Edge polish to the profile you chose
- Final walkthrough and sealer schedule (if granite)
- 1-year written workmanship warranty
What it costs
Lawrenceville countertop installs run $2,400 to $7,800 for a mid-size kitchen, depending on material. Written line-item quotes, template-to-install in 7 days.
| Job | Typical price | Notes |
|---|---|---|
| Laminate (mid-size kitchen) | $2,400-$3,600 | Edge profile, color and whether the splash is included move the number. |
| Butcher Block (maple or walnut) | $2,800-$4,500 | Finish and species change pricing. Includes food-safe mineral oil finish. |
| Granite (mid to premium) | $3,500-$6,200 | Slab yard pick in Buford or Norcross. 5-year sealer on install. |
| Quartz (3cm) | $4,200-$7,800 | Caesarstone, Cambria, Silestone. No sealing, no re-sealing. |
| Undermount Sink Re-Install | $225-$450 | Common after a previous install's adhesive failed. |
| In-Home Measure and Written Quote | Free | No deposit, no obligation. |
Ranges are typical for Countertop Installation jobs in Lawrenceville and confirmed with an exact written quote before any work starts.