Skip to content

Kitchen Remodeling Cost Guide for Lawrenceville GA Homes

Honest 2026 cost ranges for kitchen remodels in Lawrenceville by scope, plus what Gwinnett County permits actually cost and which parts you can safely DIY without voiding a warranty.

Published · By Carlos Mendoza

Documentary photo of an open spiral notebook on a kitchen island with handwritten budget numbers, a calculator, measuring…

A typical kitchen remodel in Lawrenceville runs $16,000 to $62,000 depending on scope. A cabinet-and-counter refresh with no plumbing changes is $12,000 to $22,000. A mid-range full remodel keeping the same footprint is $26,000 to $45,000. A full remodel with a wall removal, new island, and layout change is $48,000 to $82,000. Those are the real numbers in 2026, not Pinterest fantasy.

What drives kitchen remodel cost in Lawrenceville?

Three things, in this order: cabinets (35 to 45% of the budget), counters (10 to 15%), and labor and permits (25 to 35%). Appliances, flooring, lighting, and backsplash make up the rest. In Lawrenceville specifically, two local factors push the labor side of the budget. Older 1970s brick ranches that make up most of the stock off Collins Hill, Pike Road and in the Bethesda area often have out-of-plumb walls and settled slabs from red-clay soil movement. Add $800 to $2,200 for self-leveling compound and cabinet shimming on these. Second, those same 1970s ranches commonly still have aluminum branch-circuit wiring in the kitchen, which triggers AlumiConn pigtail retrofit at every device for safety, adding $300 to $700.

What does a Gwinnett County kitchen remodel permit cost?

Permits in Gwinnett County are reasonable. The electrical permit for a new 240V circuit or recessed-lighting run is $35 to $75. Plumbing permits for moving a sink or dishwasher are $45 to $85. Gas-fitting permits for a new gas range connection are $50 to $90. A full-kitchen combo permit for a major remodel (plumbing, electric, and gas) runs $125 to $225. These are pass-through costs, we add our coordination time on top. Cabinet swaps and counter replacements that do not touch utilities do not need permits.

Permits file at the Gwinnett Justice and Administration Center on Lawrenceville St in downtown Lawrenceville. Issuance runs 5 to 10 business days most of the year. For jobs that span June through August, expect an extra 3 to 5 business days because summer is the peak remodel season in Gwinnett.

How long does a kitchen remodel take in Lawrenceville?

A cabinet-and-counter refresh is 5 to 10 business days. A mid-range full remodel is 3 to 5 weeks. A full remodel with wall removal and structural work is 6 to 10 weeks. Those are on-site days, not elapsed calendar days. Add 2 weeks for cabinet lead time (longer for custom), 1 week for countertop template-to-install, and 5 to 10 business days for permits.

What should I budget for appliances in a Lawrenceville kitchen?

Mid-range appliance packages run $4,500 to $8,500 for refrigerator, range, dishwasher, microwave, and hood. High-end packages (Sub-Zero, Wolf, Thermador) run $18,000 to $35,000 for the same five pieces. Install adds $650 to $1,800 for the mid-range package, $2,200 to $3,800 for the high-end. If you are switching from an electric range to an induction range (very popular in 2026), budget a panel upgrade on any 1970s Lawrenceville ranch with a 100-amp panel, which runs $2,400 to $4,500 for 100A to 200A.

When should I DIY, and when should I call someone?

Honest answer: more than you think. Here is what you can safely DIY in a Lawrenceville kitchen remodel.

DIY is fine for: painting walls, removing old backsplash tile (wear a dust mask, the older stuff in Historic Downtown Lawrenceville homes can hide lead paint from pre-1978 jobs), demo of old cabinets if you are keeping the drywall, swapping a dishwasher that already has the water and drain lines in place, swapping a basic faucet set on existing supply lines with working shut-offs, and painting cabinet doors and frames (prep is 80% of the job, YouTube it carefully). Weekend-warrior work, zero permits needed, nothing goes wrong.

Call a pro for: anything that touches a gas line, anything that touches a 240V circuit, moving plumbing to a new location, countertop installation (the methacrylate adhesive on undermount sinks has a 15-minute working time, miss it and the sink falls), anything that removes an interior wall (load-bearing checks matter here, and almost every 1970s Lawrenceville ranch has at least one load-bearing wall between the kitchen and dining room), anything that touches aluminum wiring (AL/CU safety practice matters), and anything that needs a Gwinnett County permit, because a DIY permit done wrong costs more to fix than hiring it out from day one.

What is different about remodeling a Lawrenceville kitchen vs. other Atlanta suburbs?

Three real differences. First, red-clay soil movement: Lawrenceville slabs shift 1/4 to 1/2 inch with wet-dry cycles, which shows up as uneven cabinet runs and crack-prone counter seams if the installer skips laser-leveling. Second, aluminum branch wiring in homes built between 1965 and 1973 (common in Collins Hill, Pike Road, Bethesda), which triggers safety retrofits during electrical work. Third, the Hispanic-community concentration, especially off Pike Road and the GA-316 corridor: about 40% of our Lawrenceville remodels are quoted in both Spanish and English, and multigenerational-household kitchen requests (two prep zones, large island seating 6+, warming drawer for staggered dinner times) are common.

The flip side: Lawrenceville has lower per-sqft labor costs than Alpharetta or Buckhead, Gwinnett County permit office turnaround is fast, and the slab-on-grade ranch style means less structural complexity than two-story remodels.

What about sealing products from big-box stores?

Skip the big-box latex caulks for anywhere water hits (sink rim, dishwasher junction, backsplash-to-counter joint). They fail in 18 months in Georgia humidity. 100% silicone caulk from a construction-supply counter (Lowe's and Home Depot carry it, just not on the home-aisle shelf) costs $2 more per tube and lasts 8 to 10 years. This is one of the cheapest upgrades you can make to a DIY kitchen project.

Final thoughts on budgeting

Build a 15% contingency into whatever your remodel budget is. In Lawrenceville specifically, the contingency gets used on older-home surprises: hidden drywall damage behind old backsplash, settled slabs under cabinets, aluminum wiring that was not called out at the measure, and unpermitted work from a previous owner that needs to be redone to pass inspection. If you get through the project without using it, that is the money for the lighting upgrade you were thinking about.

If you want a written line-item quote for your kitchen in Lawrenceville, Lilburn, Norcross, Duluth or anywhere else in Gwinnett County, give us a call and we will be at your door within 48 hours.

More guides

Need Kitchen Remodeling in Lawrenceville, GA?

Talk to a local kitchen remodeling company serving Lawrenceville and nearby neighborhoods.

Call nowGet a quote